Sony TC-RX55 - General Information and Features; General Unit Specifications; Product Features Overview

TC-RX55/RX55ES/RX410
General
Power requirements
US, Canadian, E2 model: 120 V AC, 60 Hz
AEP, E3 model: 220 V AC, 50/60 Hz
UK model: 240 V AC, 50/60 Hz
Power consumption
22 W (TC-RX410)
19W (TC-RX55/RX55ES)
TC-RX410:
Approx. 430 x 118 x 295 mm (w/h/d)
(17 x 4, x 115/, inches)
TC-RX55/RX55ES:
Approx. 430 x 120 x 285 mm (w/h/d)
(17 x 43/, x 11/4 inches)
including projecting parts and controls
Approx. 3.9 kg (8 Ibs 10 oz)
Dimensions
Weight
Supplied accessory
Connecting cord (2)
Design and specifications are subject to change without notice.
¢ The Dolby HX PRO* system to improve the linearity
of the tape’s high-range response during recording.
¢ Cue & review and memory play functions to provide
easy access to a desired position.
¢ B and C type Dolby NR* systems to reduce tape hiss
noise.
¢ The optional remote contro! unit allows various
operations to be remotely controlled.
* Dolby noise reduction and HX Pro headroom extension
manufactured under ticense from Dolby Laboratories
Licensing Corporation. HX Pro originated by Bang & Olufsen.
“DOLBY”, the double-D symbol DO and “HX PRO” are
trademarks of Dolby Laboratories Licensing Corporation.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK A OR DOTTED
LINE WITH MARK A ON THE SCHEMATIC DIAGRAMS
AND IN THE PARTS LIST ARE CRITICAL TO SAFE
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB-
LISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
A LA SECURITE!
LES COMPOSANTS IDENTIFIES PAR UNE MARQUE /\
SUR LES DIAGRAMMES SCHEMATIQUES ET LA LISTE
DES PIECES SONT CRITIQUES POUR LA SECURITE
DE FONCTIONNEMENT. NE REMPLACER CES COM-
POSANTS QUE PAR DES PIECES SONY DONT LES
NUMEROS SONT DONNES DANS CE MANUEL OU
DANS LES SUPPLEMENTS PUBLIES PAR SONY.
MODEL IDENTIFICATION (TC-RX55)
— Specification Label Printed on Back Panel —
SONY:
STEREO CASSETTE DECK
Vda
MODEL NO, TC-RX55
SERIAL NO.
MADE IN JAPAN
AEP, E3 Model: AC 220 V ~ 50/60 Hz
UK Model: AC 240 V ~ 50/60 Hz
Canadian, E2 Model: AC 120 V 60 Hz 19 W
OOD & A : aezeniy
TABLE OF CONTENTS
Section Title Page
SPeCilications: <2 p4%s..4: owe wind oo ew BOR GS 1
Features ge i ot Se a he ae cn ark A 2
Model Identification ................40. 2:
Safety CHECK-OUL 2/4 wun Sods Breed WG ae ee 3
1. GENERAL
Identification of Front Panel Parts...... 3
2: ADJUSTMENTS
2-1. Mechanical Adjustments ............ 4
2-2. Electrical Adjustments.............. 4
3. DIAGRAMS
3-1. Printed Wiring Boards .............. 8
3-2. Schematic Diagram ................ 11
4. EXPLODED VIEWS............... 15
5 ELECTRICAL PARTS LIST......... 19