Sony TC-WR545 - Disassembly Procedures; Front Panel Disassembly; Mechanism Deck Disassembly; Capstan Motor and Reel Motor Disassembly

SECTION 2
DISASSEMBLY |
2-3. CAPSTAN MOTOR, REEL MOTOR
Note : Follow the disassembly procedure in the numerical order given.
@ +PTPWh2 x 23
CASE
Unscrew the four case attachment screws M3 X 8 and
remove the case.
2-1.
FRONT
PANEL
\
@
Fitting
base
E model only
FRONTPANEL @- ©
VOLTAGE SELECTOR When installing, pull the FR i)
capstan
belt
and
put
and
put
around
claws.
When installing, pull the |
around claws.
VOLTAGE
SELECTOR
@ Remove the flat cable.
© Remove the front Panel
@ claw @ Connectors
@ Capstan motor M1 (DECK A)
M3 (DECK B)
Ground plate
2-2, MECHANISM DECK @ MD(A)board (DECK A)
MD(C)board (DECK B)
@ Press the EJECT button.
@ Reel motor M2 (DECK A)
M4 (DECK B)
Remove the cassette holder
Belt (FR)
© +P2.6x28
2-4. HEAD, PINCH ROLLER
@ Cassette lid
3] Claw
© BVIP2.6x8
1) Claw
@ Head base assy
HP101(DECK A)
HRPE101(DECK B)
Mechanism deck
6 : @ BVTP2.6 x 8
@ Lever (pinch lever REV) assy @ Lever (pinch lever FWD) assy