Sony TC-WR665S - DISASSEMBLY PROCEDURES; Front Panel Disassembly; Mechanism Deck Disassembly; Motor and Head Assembly Disassembly

SECTION 2
DISASSEMBLY 2-3. CAPSTAN MOTOR, REEL MOTOR
Note : Follow the disassembly procedure in the numerical order given. @ +PTPWH2 x 23
CASE
Unscrew the four case attachment screws M3 X 8 and
remove
the
case.
@
Fitting
base
2-1.
FRONT
PANEL
E model only
FRONTPANEL @-®©@
When installing, pull the FR belt
VOLTAGE SELEcToR f— [ AG ]
capstan belt and put and put around claws.
When installing, pull _
around claws.
VOLTAGE
SELECTOR
@ Remove the flat cable. —
© Remove the front Panel
@ claw @ Connectors
@ Capstan motor M1 (DECK A)
M1 (DECK B)
Ground plate
@ Remove the flat cable.
@ AUDIO board (DECK A)
@ +82.6x3
AUDIO board (DECK B)
2-2. MECHANISM DECK
@ Press the EJECT button. @ Reel motor M2 (DECK A)
M2 (DECK B)
Remove the cassette holder
Belt (FR)
© +P2.6 x 2.8
2-4. HEAD, PINCH ROLLER
@ Cassette lid
© BVTP26 x8
1) Claw
1 eg
‘J @ Head base assy
HP101(DECK A)
HRPE101(DECK B)
@ Mechanism deck
@ BVTP2.6 x 8
@ Lever (pinch lever REV) assy @ Lever (pinch lever FWD) assy