Sony TRINITRON KV-14FV300 - Using the Channel Setup Menu (continued)

Using the Menus
21
Channel
Skip/Add
Use this feature after you run Auto Program to skip unwanted channels
or add new ones. Press
g to open the Channel Skip/Add menu:
1 Use the
F or f buttons to select the position of the desired channel,
then press .
2 Use the
F or f buttons to select Skip or Add, then press .
3 Press
G to return to the Channel Setup menu or press to exit.
Channel
Label
Label up to 40
channels with
their call letters
Press
g to open the Channel Label menu:
1 Press , then press
F or f until you reach the desired channel
number. Press to activate the channel.
2 Press , then use the
F or f button to display the first call letter or
number of the caption, then press to select it. When finished, press
to activate.
 Pressing CH+ or CH- will skip over channels that have been skipped. You can still use the
--9 buttons to directly tune to skipped channels.
 Favorite Channels, Cable, Channel Skip/Add, and Channel Label cannot be used when
Channel Fix is set.
01US01COV-BR2TOC.book Page 21 Thursday, February 21, 2002 1:49 PM