EasyManua.ls Logo

Sony Trinitron KV-27XBR37 User Manual

Sony Trinitron KV-27XBR37
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Sony Trinitron KV-27XBR37 and is the answer not in the manual?

Sony Trinitron KV-27XBR37 Specifications

General IconGeneral
BrandSony
ModelTrinitron KV-27XBR37
CategoryTV
LanguageEnglish

Summary

SECTION 1 GENERAL

Step 1: Connections

Illustrates how to connect various cables for antenna, VCR, and camcorder.

Step 2: Setting up the remote commander

Details setting up the remote commander and its different operation modes.

Watching two programs at the same time - PIP

Explains how to use the Picture-in-Picture feature to display two channels simultaneously.

SECTION 2 DISASSEMBLY

SECTION 3 SET-UP ADJUSTMENTS

3-1. BEAM LANDING

Procedure for adjusting the convergence of electron beams for optimal picture alignment.

3-2. CONVERGENCE

Detailed steps for adjusting horizontal and vertical static and dynamic convergence.

3-3. FOCUS ADJUSTMENT

Instructions for adjusting the focus control on the flyback transformer for sharp picture.

3-4. G2 (SCREEN) AND WHITE BALANCE ADJUSTMENTS

Procedures for adjusting screen grid (G2) and white balance for accurate color reproduction.

SECTION 4 SAFETY RELATED ADJUSTMENTS

R511 CONFIRMATION METHOD (HOLD-DOWN CONFIRMATION) AND READJUSTMENTS

Procedure for confirming and readjusting component R511 related to hold-down circuit.

R524 CONFIRMATION METHOD (HOLD-DOWN CONFIRMATION) AND READJUSTMENTS

Procedure for confirming and readjusting component R524 related to hold-down circuit.

B+ VOLTAGE CONFIRMATION

Method for confirming B+ voltage levels after replacing specific components.

SECTION 5 CIRCUIT ADJUSTMENTS

5-1. ELECTRICAL ADJUSTMENT BY REMOTE COMMANDER

Guide to performing electrical adjustments using the remote commander via service mode.

5-2. M BOARD ADJUSTMENTS

Specific adjustments for the M board, including frequency, contrast, hue, and balance.

5-3. P BOARD ADJUSTMENTS

Adjustments related to the P board, focusing on picture-in-picture position and linearity.

SECTION 6 DIAGRAMS

6-1. BLOCK DIAGRAMS (1)

High-level block diagrams illustrating the TV's internal signal flow (Part 1).

Related product manuals