Need help?Do you have a question about the Sony UVW-1600P and is the answer not in the manual?
General| Type | Professional VCR |
|---|---|
| Video Signal | NTSC |
| Video Heads | 2 |
| Audio Tracks | 2 |
| Audio Channels | 2 |
| Power Requirements | AC 100-240V, 50/60Hz |
| Frequency Response | 50 Hz to 15 kHz |
| Signal-to-Noise Ratio | 48dB |
| Input/Output Connectors | BNC, XLR |
Outlines the steps for properly installing the UVW-1800P/1600P for optimal performance and accessibility.
Covers switch settings on panels and sub-control panels, and further setup/adjustment procedures.
Describes the alarm and error code displays, their meanings, and detection methods.
Detailed procedure for removing and installing the cassette compartment.
Step-by-step instructions for replacing various circuit boards within the unit.
Explains how to perform automatic or semi-automatic checks of the servo system, including motor and sensor checks.
Details the procedure for automatically or semi-automatically adjusting the servo system.
Outlines essential maintenance tasks after servicing, including cleaning heads and surfaces.
Provides a table for periodic inspection, detailing maintenance items, parts, hours, and remarks.
Provides general information, preparation, and notes on oil/grease for parts replacement and adjustment.
Step-by-step instructions for replacing the upper drum assembly, including tools and flow chart.
Procedure for replacing the drum assembly, detailing cases for replacement and tools required.
Procedure for replacing the reel table assembly, common for take-up and supply sides.
Procedure for replacing reel motors on the T and S sides, including vertical adjustment.
Procedure for replacing brake lining assemblies, detailing states of brake linings during operation.
To Next Page
