SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
VCT-FS7
SPECIFICATIONS
LIGHT WEIGHT ROD SUPPORT
9-896-107-01
2014K33-1
©
2014.11
US Model
Canadian Model
AEP Model
Chinese Model
Ver. 1.0 2014.11
Dimensions (W / H / D) Approx. 118 × 63.2 × 250 mm (4
3
/4 × 2
1
/2 × 9
7
/8 inches)
Mass Unit: 980 g (2 lb 2.6 oz), Rod (1): 160 g (5.6 oz)
Supplied items Operating Instructions (2), screws (+B M3×8) (10),
screw (3/8 in.) (1) , Φ15 rods (2)
Design and specications are subject to change without notice.
he VCT-FS7 is an accessory that attaches to Sony PXW-FS7 camcorders to
improve camera stability when shooting. Attaching the unit to the PXW-FS7 also
enables the camera to be mounted on a VCT-14/VCT-U14 tripod attachment.
Note: PXW-FS7 is not included in this unit.
To Next Page
Need help?
General
