Need help?Do you have a question about the Sony VPL-FHZ55 and is the answer not in the manual?
General| Native aspect ratio | 16:9 |
|---|---|
| Projection distance | - m |
| Projection technology | 3LCD |
| Supported aspect ratios | - |
| Contrast ratio (typical) | 8000:1 |
| Screen size compatibility | 40 - 600 \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, horizontal | 30 ° |
| Focus | Manual |
| Throw ratio | 1.4 - 2.3:1 |
| Zoom capability | Yes |
| Focal length range | - mm |
| Vertical lens shift range | - % |
| Service life of light source | 20000 h |
| 3D | No |
| Supported video modes | 480p, 576p, 720p, 1080i, 1080p |
| Analog signal format system | NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
| Supported graphics resolutions | 1920 x 1200 (WUXGA) |
| BNC input ports | 5 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 0 |
| Noise level | 40 dB |
| Noise level (economic mode) | 35 dB |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, IND, ITA, JPN, KOR, NOR, POL, POR, RUS, SWE, THA, TUR, VIE |
| Placement | Desktop |
| Product type | Large venue projector |
| Product color | White |
| Power source | DC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.3 W |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 35 - 85 % |
| Cables included | AC |
| Remote control type | IR |
Weight and Dimensions| Depth | 487 mm |
|---|---|
| Width | 390 mm |
| Height | 134 mm |
| Weight | 11000 g |
Warnings about servicing, electric shock, fire, injury, and requiring qualified personnel.
Caution against using controls or adjustments other than specified to avoid radiation exposure.
Warning to avoid direct contact with invisible laser beams from opened or damaged units.
Warning about explosion risk if the battery is replaced incorrectly with non-equivalent types.
Essential safety measures for service personnel handling the unit, especially regarding the laser diode.
Step-by-step guide on how to disassemble the unit for servicing and repairs.
General servicing notes, including laser diode safety and procedures for replacing optics unit, prism block, or C board.
Procedures for adjusting laser luminance and sensor readings after component replacement.
To Next Page
