Sony VPL-SW526C User Manual

4-453-101-12 (1)
© 2012 Sony Corporation
Data
Projector
Operating Instructions
Before operating the unit, please read this manual and supplied Quick Reference Manual
thoroughly and retain it for future reference.
VPL-SW536C/SW526C/SW536/SW526
VPL-SX536
Not all models are available in all countries and area. Please check
with your local Sony Authorized Dealer.

Sony VPL-SW526C Specifications

General

Resolution	WXGA (1280 x 800)
Contrast Ratio	3000:1
Light Source	Lamp
Display Technology	3LCD
Zoom Ratio	1.2x
Interfaces	HDMI, VGA, Composite Video, USB
Noise Level	29 dB (Eco mode)

Summary

Location and Function of Controls

Connector Panel Layout

Remote and Panel Keys

Details the buttons on the remote commander and the projector's control panel.

Preparation and Connection

Connecting the Projector

Connecting a Computer

Details how to connect computers via RGB/YPBPR and HDMI interfaces for video input.

Connecting Video Equipment

Projecting and Adjusting Image

Initial Image Projection

Explains how to set up and start projecting an image onto a screen for the first time.

Adjusting Image Focus and Size

Details how to adjust projected image focus using the focus ring and size using the zoom lever.

Adjusting Image Position

Describes adjusting the projected image position using lens shift dials and projector adjusters.

Correcting Image Distortion

Details how to correct trapezoidal distortion using the Keystone feature and change aspect ratio.

Turning Off the Projector

Step-by-step guide on how to properly shut down and turn off the projector.

Menu-Based Adjustments and Settings

Navigating the Menu System

General instructions on how to navigate and use the projector's menu system for settings.

Picture Menu Options

Details the Picture menu options for adjusting image quality parameters like contrast and brightness.

Screen Menu Options

Explains the Screen menu for adjusting image size, position, and aspect ratio for different input signals.

Function Menu Options

Explains the Function menu options for various projector settings like volume, speaker, and startup image.

Operation Menu Options

Details the Operation menu for language selection, status display, and security lock settings.

Connection and Power Menu

Covers network settings, LAN setup, ECO mode, and power management configurations.

Installation Menu Options

Details installation options like image flip, projector attitude, and high altitude mode adjustments.

Network Functionality

Using Network Features

Outlines projector network capabilities like web browser control, status checking, and remote operation.

Web Browser Control Setup

Interactive Projection Features

Using the Interactive Function

USB Connection for Interactive Use

Interactive Pen Calibration

Network Presentation Function

Using Network Presentation

Installing Presentation Software

Projecting Images via Network

USB Media Projection

Projecting via USB Cable

Starting USB Display Application

USB Media Viewer

Using USB Media Viewer

Troubleshooting and Maintenance

Understanding Projector Indicators

Message List and Remedies

General Troubleshooting Guide

Guides users through diagnosing and resolving common projector problems, covering image, sound, and connectivity.

Lamp Replacement Procedure

Provides detailed instructions and safety cautions for replacing the projector lamp.

Air Filter Cleaning

Step-by-step guide for cleaning the projector's air filter to maintain optimal performance.

Technical Specifications

Model and Display Specifications

Image and Audio Specs

Connector and Input/Output Details

Environmental and Power Requirements

Physical Dimensions and Accessories

Acceptable Input Signals

Projection Distance and Lens Shift

Lens Shift Range Explanation

Projection Distance Tables and Formulas

Lens Shift Range Formulas

Dimensions