74
MENU • You pressed a key on the remote control while selecting a menu on
the recorder. You pressed a key on the recorder while selecting a
menu on the remote control.
NAME FULL • You tried to enter more than 200 letters to label a single track,
group, or disc.
• You tried to enter a total of more than approximately 1,700 letters
for track or disc names.
NO BATT • The rechargeable battery is not inserted.
, Insert a rechargeable battery.
NO COPY • You tried to make a copy from a disc that is protected by the Serial
Copy Management System. You cannot make copies from a
digitally connected source which was itself recorded using digital
connection.
, Use analog connection instead (page 28).
NO DISC • You tried to play or record with no disc in the recorder.
, Insert an MD.
NO EDIT • You selected “ : Erase” with a disc without group setting.
, You cannot erase groups with a disc with no groups.
• You selected, “ : Set”, “ : Release”, “Move”, or “Erase” while
recording.
• You tried to erase the track mark at the beginning of the first track
or group.
• You tried to erase a track mark to combine tracks the recorder
cannot combine (a track recorded in stereo and in mono, for
example).
• You tried to overwrite a track marks.
No MARK • You tried to operate bookmark track play with a disc without
bookmarks.
, Set bookmarks (page 33).
NO SET • You tried to make the following settings while recording.
— Recording mode
— Recording level
— Selection of “ : REC” in menu
— Selection of “REC-Posi” during recording to a group.
NoOPERATE
• You pressed +, – while setting a program on the remote control.
• You tried to set Auto Time Mark while recording through digital
connection.
• You tried to press X or T MARK during synchro-recording.
NO SIGNAL • The recorder could not detect digital input signals.
, Make sure that the source is connected firmly (page 21).
P/B ONLY • You tried to record or edit on a pre mastered MD (P/B stands for
“playback”).
, Insert a recordable MD.
Error message Meaning/Remedy
To Next Page
Loading...
