Terminal Description
DIGITAL AUDIO OUT (OPTICAL)
Connects to an audio system with optical audio input.
When connecting an audio system not compatible with ARC using
an HDMI cable, you need to connect an optical audio cable to the
DIGITAL AUDIO OUT (OPTICAL) to output digital sound.
(Cable/Antenna input)
Connects to Cable/Antenna/External Box.
Note
When connecting the cable to the Cable/Antenna input, finger
tighten only, over tightening the connection can damage the
TV.
LAN
Connect to a Router.
Connect to the Internet using a LAN cable.
CENTER SPEAKER IN
To use your TV speakers as the center speaker, connect the output
of your AV receiver to the CENTER SPEAKER IN on your TV.
To use your TV speakers as the center speaker, press the
(Quick Settings) button on the remote control, then select [Settings]
— [Display & Sound] — [Audio output] — [Speakers] — [Audio
system].
Note
Before connecting cables, disconnect the AC power cord
(mains lead) of both the TV and AV receiver.
If you do not use the CENTER SPEAKER IN terminal or the
S-CENTER SPEAKER IN input, change the following setting
to prevent noise from the speakers.