1
2
Press INPUTor (Input) on the remote control and select [Help]. If [Help]
does not exist, select [Edit] and add [Help].
Select [Status & Diagnostics]. Enable [Automatically check for update] in
[Status & Diagnostics] — [System software update].
Hint
To update the software manually, select [Software update].
You can check the BRAVIA notifications or support website for a list of changes
made by the software update.
Note
When [Automatically check for update] is disabled, the TV cannot receive
notifications even when a software update is available.
Updating software via USB storage device
If you do not have a network connection, you can also update the software by using a
USB storage device. Use your computer to download the latest software from the Sony
support website onto a USB storage device. Insert the USB storage device to a USB port
on the TV and the software update will start automatically.
If you will update the TV software by using a USB storage device, you should read the
cautions for update by USB storage device on the website.
For more about the support site, please see the Support Site page.
Related topics
Connecting to a Network
[98] Start here | Start here
If a full reset (restart) of the TV is required
If you have trouble such as the picture not displaying on the screen or the remote control
not working, reset the TV with the following procedure. If the problem persists, try the
factory reset procedure below.
To Next Page
Loading...
