(A) Voice function LED (On the left side at the bottom of the TV. Only TVs with a built-in
MIC. )
(B) Operational response LED (In the center at the bottom of the TV.)
The built-in MIC may not be available depending on your region/model/language.
Voice function LED
Turns “on” or “blinks” when “Hey Google” is detected and the TV is communicating with
the server. The lighting pattern of this LED depends on the server communication status.
Note
You can use the built-in MIC on the TV when the Built-in MIC switch is on. For the
location of the Built-in MIC Switch, refer to the Reference Guide/Setup Guide
supplied with the TV.
After you press the Google Assistant/MIC button on the remote control and finish
activating the built-in MIC on the TV, the voice function LED turns on in amber when
the built-in MIC on the TV is off (when on, the Operational response LED turns on in
amber).
Operational response LED
Turns “on” or “blinks” in white when the TV is turning on, when receiving signals from the
remote control, or when updating the software using a USB storage device.
When ["Ok Google" detection] is enabled, it turns “on” in amber. (only TVs with a built-in
MIC )
The built-in MIC may not be available depending on your region/model/language.
When the Built-in MIC switch is on, it turns “on” in amber. (only TVs with a built-in MIC )
The built-in MIC may not be available depending on your region/model/language.
Related topics
Using the built-in MIC on the TV (only TVs with a built-in MIC)
You want to disable the LED so that it does not light up or blink.
Home network features
Software updates
*
*
*
*
*
*
To Next Page
Loading...
Need help?
General
