Audio system prioritization
If enabled, this automatically switches the audio output to a BRAVIA Sync-compatible audio
system when the TV is turned on.
Home theater control
Turns your audio system on, and allows you to control it.
Sound mode sync
The sound field of the specified audio system will switch automatically when the TV's sound
mode changes.
A/V sync
Adjust audio and video timing while using a Bluetooth A2DP audio device or a specific audio
system connected with an HDMI cable.
eARC mode
If [Auto] is selected, high quality audio is output when an eARC supported device is connected to
an HDMI port labeled “eARC/ARC”. eARC is an extended version of ARC and stands for
Enhanced Audio Return Channel. By connecting an eARC supported device, you can enjoy
uncompressed, high-quality audio formats and newer surround audio formats in addition to the
audio formats supported by ARC connections thus far. For audio formats supported by eARC,
refer to Pass-through audio formats supported with eARC.
To connect the TV and an eARC supported device, use an eARC-supporting HDMI cable . To
connect an eARC supported device, refer to Connecting an audio system.
Sony's Premium High Speed HDMI Cable(s) is recommended.
Digital audio out
Configure the output method when outputting digital audio. This setting is available only when
[Speakers] is set to [Audio system].
Hint
There is less deterioration and noise from signal transmission, and the sound
quality is superior compared to analog connections.
Digital audio out volume
Applied for PCM only. The volume levels between PCM and compressed audio will differ.
Dolby Digital Plus output
Select output for Dolby Digital Plus for audio systems supporting Dolby Digital Plus and ARC. If
you use ARC and optical audio out, select [Dolby Digital]. (Dolby Digital Plus will be muted over
optical audio out.)
*
* ™
To Next Page
Loading...
Need help?
General
