Sony X80L - Page 71

1
2
We recommend authorised Premium High Speed HDMI Cable(s) bearing the HDMI
logo.
Related topics
No sound but good picture.
No audio or low audio with a home theatre system.
[58] Audio system (such as an AV receiver or sound bar) | Audio system (such as an AV
receiver or sound bar)
Adjusting an audio system
After connecting an audio system to the TV, adjust the TV’s audio output from the audio
system.
Adjusting an audio system connected with an HDMI cable or
digital optical cable
After connecting the TV to your audio system, press the (Quick Settings)
button on the remote control, then select [Settings] — [Display & Sound] —
[Audio output] — [Speakers] — [Audio system].
Turn on the connected audio system, then adjust the volume.
If you connect a BRAVIA Sync-compatible device with an HDMI connection, you can
operate it by simply using the TV’s remote control.
Note
You need to configure the [Digital audio out] settings according to your audio system.
Press the (Quick Settings) button on the remote control, then select [Settings] —
[Display & Sound] — [Audio output] — [Digital audio out].
If the audio system is not compatible with Dolby Digital or DTS, set [Settings] —
[Display & Sound] — [Audio output] — [Digital audio out] to [PCM].
The [Digital audio out] settings are disabled when using audio signals that are passed
through from the HDMI input and using eARC.
Hint
* ™