1
1
sound with the A/V sync setting.
Press the (Quick Settings) button on the remote control, then select
[Settings] — [Display & Sound] — [Audio output] — [A/V sync] — the desired
option.
If the audio device is connected with an HDMI cable, the sound may be delayed due to the
properties of the audio device. In that case, you can adjust the video and audio output timing
with the A/V sync setting.
Press the (Quick Settings) button on the remote control, and then select
the following in order.
[Settings] — [Display & Sound] — [Audio output] — [A/V sync] — the desired setting
Note
Depending on the connected Bluetooth audio device or connected HDMI device, the
picture and sound may not match even when the [A/V sync] setting is set to [On] or
[Auto].
To prevent the TV from displaying a black screen immediately after turning it on when a
sound bar is connected wirelessly (Bluetooth), set the [A/V sync] setting to [On].
If [Picture mode] is set to one of the options below, the output timing of the picture and
sound is not adjusted even when the [A/V sync] setting is set to [Auto].
[Game]
[Graphics]
[Photo]
To adjust [A/V sync] when in any of these modes, select [On].
When a Bluetooth audio device is connected, the responsiveness of the TV while
playing video games may feel slower due to the [A/V sync] setting adding a delay to the
output timing of the picture. For games that are dependant on response time, we do not
recommend you use a Bluetooth device and recommend that you use the TV speakers
or a sound bar with a wired (HDMI cable/digital optical cable) connection instead.
[68] Using the TV with Other Devices
BRAVIA Sync-compatible devices
BRAVIA Sync overview
Using features available for BRAVIA Sync-compatible devices
To Next Page
Loading...
