Terminal Description
following steps to prevent noise from the speakers.
Press the (Quick Settings) button on the remote control, and
disable [TV centre speaker mode] in [Settings] — [Display &
Sound] — [Audio output].
(Headphone)
Connects to the headphone jack to listen to sound from the TV.
Supports 3-pole stereo mini jack only.
Note
You cannot output sound from both the headphone and the TV
speakers at the same time.
HDMI IN
Connects to the HDMI device. The HDMI interface can transfer the
digital video and audio on a single cable. To enjoy high quality 4K
contents, connect a Premium High Speed HDMI Cable(s) and follow
the instructions displayed on the screen to set the [HDMI signal format]
of the HDMI IN port.
HDMI IN (4K 120 Hz)
If you use an HDMI device that supports video output in 4K 100/120
Hz, connect the Ultra High Speed HDMI Cable, and follow the
instructions displayed on the screen to set the [HDMI signal format] of
the HDMI IN port.
Note
4K 100 Hz support depends on your country/region.
HDMI IN (eARC/ARC)
To connect an audio system that supports eARC (Enhanced Audio
Return Channel) or ARC (Audio Return Channel), connect to the HDMI
port labelled “eARC/ARC” on the TV. It is a feature that sends audio to
an audio system that supports eARC/ARC through an HDMI cable. If
™
™
To Next Page
Loading...
