Help Guide
In-Car Receiver
XAV-9500ES
Getting iDataLink Maestro Ready
Connecting the iDataLink Maestro module (not supplied) to this unit allows you to display the current car status and
adjust certain settings.
Available functions and settings differ according to your car type and the firmware installed to the iDataLink Maestro
module. For more information, visit the following site:
https://www.idatalinkmaestro.com/
Sony does not guarantee all operations of the iDataLink Maestro functions and settings.
Installing the firmware to the iDataLink Maestro module is required before using the iDataLink Maestro features.
If you have any questions or problems concerning the iDataLink Maestro module that are not covered on the website,
contact:
Automotive Data Solutions Inc.
Email: maestrosupport@adsdata.ca
Call: 1-866-427-2999
5-021-904-11(1)
Copyright 2021 Sony Corporation
Check the serial number of the unit.
The serial number is indicated on the back of the unit, or touch [System Information] in [System].
1
Visit the website.
https://www.idatalinkmaestro.com/
Follow the on-screen instructions to configure the firmware according to your car type.
Enter the serial number.
2
Install the firmware to the iDataLink Maestro module.
3
To Next Page
Loading...
