Sony XE-90MKII Service Manual

OFF ON
33) $0 40
200 400
US Model
Canadian Model
AEP Made!
E Model
SPECIFICATIONS
Center frequencies
50 Hz, 100 Hz, 200 Hz,
400 Hz, 800 Hz, 1.5 kHz,
3 kHz, 6 kHz, 12 kHz
Boost/cut range +12 dB
Sub-woofer cut-off frequency
80 Hz, 120 Hz (at —3 dB)
Output gain: —oo to +8 dB
(cut-off slope —12 dB/oct)
Frequency response
5 Hz—100 kHz *8dB
Signal-to-noise ratio
More than 105 dB
(A-weighted)
Harmonic distortion (at 1 kHz)
Less than 0.005%
Gain 0 dB
General
Input Line inputs (phono jacks)
x1
Output Line outputs (phono jacks)
x3
Power requirements
12 V DC car battery
(negative ground)
Current drain 300 mA
Input remote current
4mA
Mounting dimensions
178 x 25 x 135 mm (w/h/d)
(7'/g x 1 x 53/3 inches)
Weight Approx. 650 g (1 |b 7 oz)
Accessories supplied
Mounting hardware (1 set)
Connecting cord (1 set)
FUSE REPLACEMENT
If the fuse blows, check the power connection
and replace the fuse. If the fuse blows again
after replacement, there may be an internal
malfunction. In this case, consult your nearest
Sony dealer.
Warning
Use the specified ampere fuse. Use of a
higher amperage fuse may cause serious
damage.
STEREO GRAPHIC EQUALIZER
SONY.

Sony XE-90MKII Specifications

General

Brand	Sony
Model	XE-90MKII
Category	Stereo Equalizer
Language	English