NMOS
This function makes the basic settings for NMOS. Click [Apply] to immediately apply the settings.
Item name Description Range or choices (under line: Ini-
tial value)
Enable/Disable Used to enable or disable the NMOS function.
Tip
The NMOS function and the NDCP function are mutually ex-
clusive. If the NMOS function is enabled, “LSM Enable” in XVS
MENU (7311.2) is forcibly changed to “Disable”.
Enable
Disable
Network Interface Used to set the own network interface used for communication
with the NMOS controller.
• XKS-C81XX
LAN1/1
LAN2/1
LAN1/1 or LAN2/1
• XKS-C91XX
LAN1-1/1
LAN1-2/1
LAN1-1/1 or LAN1-2/1
IS-04 Node Port Used to enter the own standby port number to be used for NMOS
Discovery and Registration Specification (IS-04).
0 to 3001 to 65535
IS-05 Connection
Port
Used to enter the own standby port number to be used for NMOS
Device Connection Management Specification (IS-05).
0 to 3002 to 65535
Registration & Discovery (IS-04)
This function makes the settings for Registration Discovery Server (RDS) to discover and register devices. Click [Apply]
to immediately apply the settings.
Item name Description Range or choices (under line: Ini-
tial value)
Node Label Used to set the name of the board indicated by the
connected RDS.
Up to 64 ASCII code characters
RDS Discovery Used to enable or disable the function that automat-
ically discovers RDS to be connected.
Enable
Disable
RDS Primary IP Ad-
dress
Used to set the address of the RDS to be connected.
This item is used when RDS Discovery is disabled.
0.0.0.0 to 255.255.255.255
Continued
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
1-35
To Next Page
Loading...
