To Next PageTo Next Page
Need help?Do you have a question about the Sony XVS-G1 and is the answer not in the manual?
General| Scaler | Yes |
|---|---|
| Product Type | Video Switcher |
| Inputs | 16 |
| Outputs | 8 |
| Video Formats | 1080i, 1080p, 720p |
| Frame Rates | 23.98, 24, 25, 29.97, 50, 59.94 |
| Audio Formats | Embedded Audio |
| Keyers per M/E | 4 |
| Control Interface | Ethernet |
| Power Supply | 100-240V AC, 50/60Hz |
Describes the functions and operation of the XVS-G1 system.
Lists the principal components of the XVS-G1 system.
Explains notation used in the manual for signal formats and GPUs.
Details the XVS-G1 system's control panels and their capabilities.
Describes the modules and supported components of the ICP-X7000 control panel.
Explains the cross-point control block's function for selecting signals in the switcher bank.
Introduces the web-based menu application and its operating environment.
Explains the necessity and procedure for installing a root certificate for menu access.
Details the process of signing into and out of the web menu.
Explains how to select signals using cross-point button rows and AUX bus control blocks.
Describes the selectable operation modes for button rows in a cross-point control block.
Defines transitions and outlines methods for switching images and keys.
Describes configuring independent transitions for each key.
Explains how to select the switch target of a transition.
Explains keys as functions for replacing parts of background images.
Details how to set the key fill signal and select the key source signal.
Explains configuring and adjusting chroma key when selected as the key type.
Defines wipes as functions that switch images using wipe patterns.
Classifies wipe patterns into standard, enhanced, rotary, mosaic, and random/diamond dust.
Explains frame memory as a function to freeze and capture single frames.
Describes the systems for frame memory input and output channels.
Explains DME for adding three-dimensional transforms and special effects.
Covers operations that move, rotate, or resize images in three-dimensional space.
Covers controlling external devices like P-Bus, GPI, VTRs, and disk recorders.
Explains recalling presets and applying pan/tilt/zoom settings for remote cameras.
Assigns specific actions to buttons for recall, such as utility commands or macros.
Divides a switcher bank into two for separate image creation on main and sub.
Explains arranging keyframes on a timeline to create effects and saving them in registers.
Describes recalling target effect timeline registers and saving edited timelines.
Describes snapshots as saving configured status for applying effects and reproducing states.
Explains performing operations on snapshots using the Flexi Pad control block.
Defines shotboxes for saving combinations of regions with effect timelines or snapshots.
Explains how to recall and register effect timelines or snapshots in shotbox registers.
Introduces macros for saving control panel and menu operations for reproduction.
Covers creating and editing macros using the Flexi Pad control block.
Explains saving setup and register data in switcher storage and recalling it as needed.
Details operations like displaying, copying, deleting, locking, and editing packages.
Describes managing image and audio content for frame memory, clip players, and SL keys.
Covers displaying, copying, moving, deleting, locking, and editing content properties.
Allows selection of settings status (startup mode) used at startup.
Covers configuring system settings like dual simul mode and M/E split.
Allows creation of main and other tables for cross-point assignments.
Sets the color displayed for cross-point buttons and indicators.
Covers configuring switcher settings like M/E banks and operation modes.
Allows selection of operation modes and configuration of output signals for switcher banks.
Covers assigning switcher banks/AUX banks and setting operation modes.
Explains assigning functions to assignable buttons on the ICP-X7000 control panel.
Assigns the use of parallel input ports based on priority sequence.
Configures trigger type and action for each GPI input.
Configures routing functions using LSM and NS-Bus protocol.
Configures matrix settings for external boxes.
Sets up bus linking functions to link two buses within the switcher.
Links transition operations between switcher banks.
Allows checking the status of the switcher system using the menu.
Describes creating and exporting switcher system log files.
Configures network settings, switcher components, and user accounts.
Detects and configures control panels connected to the switcher network.
