232
Remote Camera Control
You can recall a preset (pan/tilt/zoom and other settings)
registered in a remote camera.
• The remote camera to contr
ol must be registered
beforehand.
For details, see “Configuring Remote Cameras”
(page 427).
• Presets must be registered beforehand in the remote
camera using a remote camera co
ntroller or other tool.
• To configure settings on a remote camera
itself or to
control the pan/tilt/zoom manually, use a remote
controller or other tool.
1
Open the Home > External Device > Remote Camera
> Preset Recall menu (16105.11).
A list of the registered remote cameras appears.
2
Select the target camera for operation.
3
Press the [Preset No.] button and select a preset
number (1 to 100) from the pull-down list.
4
Press the [Recall] button.
Notes
To Next Page
Loading...
