Sony XVS-G1

287
To select all regions configured beforehand
Set the [All Regions] button to the on state.
For details about setting the regions selected
simultaneously, see “Setting Regions Selected
Simultaneously” (page 397).
4 Press the [Store] button.
To add the auto transition attribute
Set [Auto Trns] in the numeric keypad area to the on
state.
To add the effect dissolve attribute
Set [Effect Diss] in the numeric keypad area to the on
state.
For details about setting an attribute, see “Setting an
attribute” (page 288).
5 Enter a register number in the numeric keypad area.
The currently recalled register number is displayed
on the numeric ke
ypad area display. To select another
register, enter a register number.
For details about selecting a register, see “Selecting
a register” (page 285).
6 Press [Enter].
The snapshot is saved in the speci
fied register.
If you press a register button in which a snapshot is
a
lready saved, the register data will be overwritten.
To undo saving a snapshot
To undo saving immediately after saving a snapshot, set
the [Stor
e Undo Enable] button to the on state and press
the [Undo] button.
Snapshot Register
Operations
Displaying a Snapshot Register
Displaying a multi-region snapshot
register
Open the Home > Register > Snapshot > Edit Register >
Browse Multi Rgn menu (18302.11).
You can check the following information.
[Region] group region display:
Displays the region selection status.
The selected regions are displayed in white
ch
aracters, and the reference region is displayed
highlighted.
List on the left:
Displays a list of registers for the selected
regions.
•Register number
• Reference region register name
• Number of regions for which data is saved in the
register
• Lock icon
A lock icon is displayed when the reference region
regi
ster is locked.
List on the right:
Displays information for each region about the
re
gister selected in the list on the left.
• Region name
The reference region is displayed highlighted.
•Register name
• Lock icon
A lock icon is displayed when a
register is locked.
When the [Browse Single Rgn] button is pressed, the
Home
> Register > Snapshot > Edit Register > Browse
Single Rgn menu (18302.12) is recalled.
For details, see “Displaying a single-region snapshot
register” (page 288).
To select a region
1 Press the [Select] button in the [Region] group.
The [Select Region] window appears.
2 Set the button for the target region to the on state.
You can select multiple regions.
Select a tab to change the region to display.
[ME] tab:
Switcher bank regions
[User] tab: U
ser regions
[DME] tab: DME
regions
[External Device] tab:
External device regions
Note