402
To set a name
Press the [Name] button and
enter a name (up to 8
characters) using the keyboard.
When multiple buttons are selected, consecutively
n
umbered names are set.
For details, see “Name settings when multiple items are
selected” (page 77).
To release the assignment
Select the target button to rele
ase and press the [Clear]
button.
Inhibiting DME Channel
Operations
You can inhibit DME channel selection operations in the
device control block.
1
Open the Home > Setup > Panel > Module > DME
Channel Inhibit menu (19104.23).
2
Select the target DME channel to set.
To select and set multiple DME channels, place a
che
ck mark beside the target DME channels to set.
To select and set all DME channels, place a check
m
ark in the Select All checkbox.
3
Set the [Inhibit] switch to the on state.
To Next Page
Loading...
