Sony XVS-G1

291
For details about selecting a single region, see “To
select a region” (page 288).
3 In the list on the left, select the target register to
rename.
To select and rename multipl
e registers, place a check
mark beside the target registers to rename.
To select and rename all registers, place a check mark
i
n the Select All checkbox.
You can also press the [Select Register(s)] button and
e
nter a register number in the numeric keypad
window.
4 Press the [Rename] button.
The [Rename] window appears.
5 Press the input field and enter a name (up to 8
characters) using the keyboard.
6 Press [OK].
Key Snapshot Register
Operations
Displaying a Key Snapshot Register
Open the Home > Register > Key Snapshot > Edit
Register > Browse menu (18303.11).
You can check the following information.
[Key Region] group region
display:
Displays the selected switcher bank and key.
Register list:
Displays a list of registers for t
he selected key.
•Register number
•Register name
• Lock icon
A lock icon is displayed when a
register is locked.
To select a key
1 Press the [Select] button in the [Key Region] group.
The [Select Key Region] window appears.
2 Set the button for the target key to the on state.
3 Press [OK].
Editing a Key Snapshot Register
You can copy, move, and swap register data. You can also
rename, lock, and delete a register.
Copying a register
• An empty register cannot be copied.
• A locked register cannot be copied.
1 Open the Home > Register > Key Snapshot > Edit
Register > Copy/Move/Swap menu (18303.12).
A list of copy source registers is shown on
the left,
and a list of copy destination registers is shown on the
right.
2 Press the [Select] button in the [Key Region] group
on the left.
The [Select Region] window appears.
3 Set the button for the copy source key to the on state.
4 Press [OK].
Notes