SERVICE MANUAL
Sony Imaging Products & Solutions Inc.
Conditions of Use:
(1) Please use this information only for the purpose of performing repair, maintenance and/or confi guration services of the Sony products (hereinafter the “Repair services”) under the
service agreement entered into with the Sony group company (hereinafter the “Service agreement”). Using this information for any purpose other than the purpose described foregoing
is forbidden.
(2) Only the Authorized Servicer’s offi cers, employees or subcontractors (including their offi cers and employees) whose duties justify a need-to-know and who have agreed to hold
confi dential this information (collectively hereinafter the “Permitted users”) are permitted to access and use this information. To disclose or disseminate to any person other than the
Permitted users is forbidden.
(3) Destroy or erase any and all portion of this information promptly in an irrecoverable and secure fashion after achieving the purpose described in Section (1) above.
(4) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part without the prior written permission of the author.
(Notwithstanding foregoing, it is permitted to copy and distribute this information to the Permitted users.)
(5) Please notify immediately any leakage, loss, theft, misappropriation, or other misuse of this information by e-mail to the following address:
somk-gcs-tissnexim-adm@jp.sony.com
(6) In addition to the above, the terms and conditions of the Service agreement shall be applied to using this information.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confi rm that this information is up-to-date before using it.
US Model
Canadian Model
AEP Model
UK Model
E Model
Chinese Model
XLR ADAPTOR KIT
© 2019.08
2019H33-1
9-896-877-11
Ver. 1.0 2019.08
SPECIFICATIONS
XLR-K3M
Dimensions (Approx.):
XLR Adaptor (XLR-A3M) unit
113.2 mm × 106.1 mm × 79 mm (Width/Height/Depth)
(4 1/2 in. × 4 1/4 in. × 3 1/8 in.)
(excluding the cord and projecting parts)
Microphone (ECM-XM1)
21 mm × 162 mm (Diameter/Length)
(27/32 in. × 6 1/2 in.)
(excluding the wind screen and cord)
Mass (Approx.):
XLR Adaptor (XLR-A3M) unit 187 g (6.6 oz)
Microphone (ECM-XM1) 121.5 g (4 oz)
Supplied items:
XLR Adaptor (XLR-A3M) (1), Microphone (ECM-XM1) (1),
Wind screen (1), Connector protect cap (attached) (2),
Extension Cable for Audio (1), Case (1), Set of printed
documentation
Design and specifications are subject to change without notice.
Multi Interface Shoe is a trademark of Sony Corporation.
SYSSET
2019/08/0822:12:05(GMT+09:00)
To Next Page
Need help?
General
