To Next PageTo Next Page
Need help?Do you have a question about the Sony XR-4750RDS and is the answer not in the manual?
General| Model | XR-4750RDS |
|---|---|
| Category | Car Receiver |
| RDS | Yes |
| Channels | 4 |
| CD Player | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| Bluetooth | No |
| Aux Input | Yes |
| Display Type | LCD |
| Remote Control | Yes |
Resets the unit to its initial state for first-time use or after battery replacement.
Allows the front panel to be detached from the unit to prevent theft.
Instructions for mounting and attaching the rotary remote control.
Guidance on how to correctly attach the front panel to the main unit.
Explains how to set the 24-hour digital clock display on the unit.
Instructions for inserting a cassette and starting playback automatically.
How to fast-forward or rewind a cassette tape during playback.
Details on intro scan and repeat play modes for cassette tapes.
Enables switching to radio when fast-winding a tape using ATA function.
Skips over silent or blank sections on the tape automatically.
How to select the correct tape type (CrO2 or Metal) for optimal playback.
Automatically finds and stores strongest radio stations in the current band.
Manually stores up to six stations per band on preset buttons.
How to select and listen to previously stored radio stations.
Improves reception by switching to monaural mode when stereo signal is poor.
How to cycle through frequency and clock display during radio reception.
Troubleshooting steps if a preset station cannot be tuned.
Introduction to Radio Data System for additional broadcast information.
Shows the name of the FM station if it transmits RDS data.
Automatically finds and re-tunes to the strongest signal for a chosen network.
How to stay tuned to a regional program without switching stations.
Allows selection of local stations not stored in presets.
Automatically tunes into FM stations broadcasting traffic announcements.
Procedures to cancel current or all traffic announcements.
Sets a preferred volume level for traffic announcements.
How the unit switches to emergency announcements automatically.
Detailed explanation of how to use the rotary remote's buttons and controls.
How to reverse the control direction for the rotary remote.
How to adjust volume, bass, treble, balance, and fader.
Quick mute function and automatic telephone mute.
Enhances low frequencies for a more powerful bass sound.
How to disable or enable the unit's beep tones.
Important safety and operational precautions for the unit and car environment.
Tips on keeping the unit and tapes clean for optimal sound quality.
Guidelines for handling and caring for cassette tapes.
Information on fuse replacement and cleaning connectors.
Step-by-step instructions for removing the unit from the car.
Identifies each control button and refers to its detailed explanation page.
Technical details for the cassette player section.
Technical details for the FM, MW, and LW tuner sections.
Technical details for the power amplifier output and impedance.
General technical information including outputs, dimensions, and mass.
Solutions for common issues like no sound or display problems.
Troubleshooting for distorted sound and AMS function issues.
Solutions for tuning issues and "ST" indication problems.
Troubleshooting for SEEK starts, no traffic announcements, and PTY display.
An alphabetical listing of all features and their corresponding page numbers.
