Mounting
I
Montage
I n
Montagem
I
Montaggio
~~~~~~L
~;JII1...
.
..
.
~~
Before
Mounting
A depth
of
at least 82.4
mm
(3
1
/4
in)
is
required to
mount
the woofer. Measure the
depth
of
the area where you are to
mount
the
speaker, and ensure that the speaker
is
not
obstructing any other components
of
the
car.
Keep
the followings
in
mind when choosing a
mounting location:
• Make sure that nothing
is
obstructing
around the mounting location
of
the
door
(front or rear) or the rear tray where you are
to
mount
the speaker.
• A hole for mounting may already be cut
out
of
the inner panel
of
the
door
(front or rear).
In
this
case,
you need
to
modify
the board
only.
•
If
you are to
mount
this speaker system in
the door (front or rear), make sure
that
the
speaker terminals, frame or magnet do not
interfere with any inner parts, such
as
the
window
mechanism in the
door
(when you
open or close the window), etc.
Also make sure that the speaker grille does
not touch any inner fittings, such
as
the
window
cranks, door handles, arm rests,
door pockets, lamps or seats etc.
• If you
are
to
mount
this speaker system
in
the rear tray, make sure
that
the speaker
terminals, frame or magnet do not touch any
inner parts
of
the
car,
such
as
the torsion bar
springs (when you open or close the trunk
lid), etc.
Also make sure that the speaker grille does
not touch any inner fittings, such
as
seat
belts, head rests, center brake lights, inner
covers
of
the rear wipers, curtains or air
purifiers, etc.
To Next Page
Loading...
