Hint
Adjust the length of the slider.
Adjust the slider to a length where the headband touches the top of your head.
4.
Adjust the orientation of the units.
Adjust the orientation of the left and right units so that each earpad fits snugly over each part of your ear.
If you put on the headset without adjusting the slider, the headset may not be positioned properly on your head,
resulting in discomfort.
5.
Operate the Bluetooth device to start playback and adjust the volume to a moderate level.
3
Adjust the volume by pressing the + (volume +)/– (volume –) buttons of the headset.
There is a tactile dot on the + button.
B: Tactile dot
When the volume reaches the maximum or minimum, an alarm sounds.
4
To Next Page
Loading...
Need help?
General
