ZV-E10
5-063-277-11(1)
EN
6
C:\01EN-ZVE10CEC\01EN.indd
DTP data saved: 2024/07/05 12:43
PDF file created: 2024/07/05 12:43
Setting the language and the clock
ON/OFF (Power) switch
Control wheel
Select items : ////
/
Confirm : Center button
1 Set the ON/OFF (Power) switch to “ON” to turn on the camera.
2 Select the desired language and then press the center of the control
wheel.
3 Make sure that [Enter] is selected on the screen and then press the
center button.
4 Select the desired geographic location and then press the center button.
5 Set [Daylight Savings], [Date/Time], and [Date Format], and then select
[Enter] and press the center button.
If you want to reconfigure the date/time or the area setting at a later
point, select MENU
(Setup) [Date/Time Setup] or [Area Setting].
To Next Page
Loading...
