Soosan SB121 - Standard Specification

Soosan H
y
draulic Breaker
Soosan Heav
y
Industries Co.
,
Ltd
2. Standard Specification
MODEL
DESCRIPTION UNIT
SB10II SB20II SB30II SB35II SB40II SB43II SB45 SB50
kg 53 65 86 122 151 208 278 471
Body
Weight
Including
Rod
lb 117 143 190 269 333 459 613 1038
kg 70 90 120 180 250 380 510 765
Side Type
lb 154 198 265 397 551 838 1124 1687
kg 73 100 120 189 298 375 577 890
Top Type
(Trench)
lb 161 220 265 417 657 827 1272 1962
kg 102 126 152 224 295 375 571 861
Operating
Weight
TS-P
lb 225 278 335 494 650 827 1259 1898
mm 972 1000 1170 1244 1347 1699 1737 1994
Side Type
in 38.3 39.4 46.1 49.0 53.0 66.8 68.4 78.5
mm 1072 1119 1210 1394 1390 1699 2070 2060
Top Type
(Trench)
in 42.2 44.1 47.6 54.9 54.7 66.9 81.5 81.1
mm 1135 1262 1342 1472 1600 1859 2101 2326
Length
TS-P
in 44.7 49.7 52.8 58.0 63.0 73.2 82.7 91.6
mm 162 176 177 233 235 290 357 395
Side Type
in 6.4 6.9 7.0 9.3 9.3 11.4 14.1 15.6
mm 162 176 177 233 350 288 357 438
Top Type
(Trench)
in 6.4 6.9 7.0 9.3 13.8 11.3 14.1 17.2
mm 252 264 264 320 320 336 378 420
Width
TS-P
in 9.9 10.4 10.4 12.6 12.6 13.2 14.9 16.5
ℓ/min 15 30∼ 20 40∼ 25 50∼ 30 60∼ 40 70∼ 50 90∼ 60 100∼ 80 110∼
Required
Oil Flow
gal/
min
4~8 5.3~10.6 6.6~13.2 7.9~16
10.6
~18.5
13.2
~23.8
15.9
~26.4
21.1
~29.1
㎏/㎠ 90 120∼ 90~120 90~120 100~130 110~140 120~150 130~160 150~170
Operating
Pressure
psi
1280
~1707
1280
~1707
1280
~1707
1422
~1849
1565
~1991
1707
~2134
1849
~2276
2134
~2418
Impact Rate BPM
800
1400∼
700
1200∼
600
1100∼
500
1000∼
500 900∼ 400 800∼ 400 800∼ 350 700∼
Hose Diameter in ⅜,½ ⅜,½ ½ ½ ½ ½ ¾ ¾
mm 40 45 53 60 68 75 85 100
Rod Diameter
in 1.6 1.8 2.1 2.4 2.7 3.0 3.3 3.9
㎥ 0.07 이하 0.03~0.1 0.06~0.2 0.1~0.25 0.15~0.3 0.2~0.35 0.25~0.5 0.4~0.6
Applicable Carrier
ton 0.8~2.5 1.2~3.0 2.5~4.5 3.0~5.5 4.0~7.0 6~9 7~14 11~16
Noise Level dB 105.5 106.8 108.5 116.9 108.7 114.5 112 113.5
* Operating weight include Cap, Rod weight by AEM regulation.
(Except for pin, hose, fitting and tubing)
* The above specifications are subject to change without prior notice for the quality enhancement.
* The above Noise level is TS-P type.
* Rod is long type standard.