Soosan SB70 - 10. Hydraulic Oil and Lubrication; Hydraulic Oil.

Soosan H
y
draulic Breaker
Soosan Heav
y
Industries Co.
,
Ltd
11. Hydraulic Oil.
Selection of hydraulic oil determines the efficiency of the hydraulic breaker performance.
Please consult with our service station under following conditions.
(1) When used in special regions where climate is severe (extremely cold or hot weather)
(2) When recommended brands of hydraulic oil are not available
(3) When hydraulic oil supplied for the base machine differ from the recommended one.
■ Hydraulic Oil and Grease
Recommended for Hydraulic Grab by Soosan
HYDRAULIC OIL GREASE
SUMMER WINTER ALL SEASON (MOS2)
ISO VG 46 ISO VG 32 ISO VG 46 NLGI No2
MOBIL DTE 25 MOBIL DTE 24 MOBIL DTE 15M
MOBIL GREASE
SPECIAL
MOBIL SHC 525 *
MOBIL
MOBIL EAL SYNDRAULIC 46 **
MOBILITH SHC 220 *
LG-CALTEX RANDOHD 46 RANDO HD 32
NEW RANDO
HD CZ
MOLYTEX EP2
BP ENERGOL HP46 ENERGOL HP32 ENERGOL HP46 -
SHELL TELLUS 46 TELLUS 32 TELLUS T 46
RETINAX
HDX-2
★: Synthetic Lubricant
★★: Environmentally Friendly Synthetic Lubricant
■ Oil Contamination
Contaminated oil results in malfunctions of the breaker as well as the base machine and causes damage to
parts. Pay special attention to oil contamination.
Contaminated oil should be changed without delay. When changing oil, thoroughly wash oil tank, cylinder
and pipes. Cleaning or replacing oil filter also requires check for oil contamination.
※ Replacement of filter : after first 50 hours and every 100 hours thereafter
※ Replacement of hydraulic oil : every 500 hours
Hydraulic oil Temperature and viscosity
Do operate the hydraulic breaker at oil temperatures from 20℃/68℉ to 80℃/176℉.
Operation at higher temperatures can damage the internal components of the breaker and carrier there
will result in reduced breaker performance.
LUBE & SPEC
Manufacture
r
WARNING