To Next PageTo Next Page
Need help?Do you have a question about the Soredex DIGORA Optime DXR-50 001 and is the answer not in the manual?
Overview of the DIGORA Optime digital imaging plate unit and system components.
Instructions for setting up the DIGORA Optime imaging plate system.
Identification and description of the main components and controls of the imaging plate unit.
Details on available accessories for the DIGORA Optime system, including imaging plates and covers.
Explanation of symbols and animations displayed on the unit for status indication and operation.
General guidelines for using the DIGORA Optime system, including accessory recommendations.
Steps to prepare the system for operation, including PC and software setup.
Procedure for preparing an imaging plate (IP) with a protective cover for X-ray exposure.
Recommendations for using imaging plate holders to improve image quality and positioning.
Instructions on how to perform an X-ray exposure using the imaging plate system.
Procedure for reading an exposed imaging plate (IP) with the DIGORA Optime unit.
Guidance on safely removing imaging plates from the unit's plate collector.
Description of the unit's standby mode and how it exits this state.
Steps to retrieve the last scanned image if it was not transferred to the PC.
Procedure for correctly powering down the DIGORA Optime unit.
How to perform an initial erase procedure on imaging plates before first use.
Specific instructions for capturing occlusal projection images using the Comfort Occlusal 4C kit.
Information on common errors, warnings, and troubleshooting steps for the unit.
General principles for handling imaging plates to ensure image quality and longevity.
Specific techniques and precautions for handling imaging plates to prevent damage and contamination.
Methods for cleaning imaging plates, including recommended solutions and what to avoid.
Guidelines for proper storage of imaging plates to maintain their condition and performance.
Criteria for replacing imaging plates due to image quality issues or physical damage.
Information on the proper disposal of imaging plates in accordance with regulations.
Instructions for cleaning the exterior and accessible parts of the imaging plate unit.
Procedures for disinfecting the unit, including safety precautions and suitable solutions.
Information regarding the maintenance requirements for the imaging plate unit.
Guidelines for obtaining repair services for the unit, emphasizing authorized personnel.
Procedures for disposing of the unit and its accessories according to environmental regulations.
Detailed technical specifications for the DIGORA Optime intraoral imaging plate unit.
Specifications and details for imaging plates (IPs) and associated hygiene bags.
Physical dimensions of the DIGORA Optime unit.
Information on electromagnetic emissions and compliance for the DXR-50 unit.
Information on electromagnetic immunity and compliance for the DXR-50 unit.
Procedures for the initial installation of the DIGORA Optime system components.
Methods for connecting the imaging plate unit to a PC or local area network (LAN).
Configuration settings for the scanner via the dental imaging software.
Common problems and solutions for the DIGORA Optime system.
General| Brand | Soredex |
|---|---|
| Model | DIGORA Optime DXR-50 001 |
| Category | All in One Printer |
| Language | English |
