To Next PageTo Next Page
Need help?Do you have a question about the SORHEA PIRAMID and is the answer not in the manual?
Details the dual-technology nature and core components of the PIRAMID sensor.
Illustrates front, back, top, and side views, highlighting key parts like the PIR lens.
Displays top and side views of detection zones for different models, with a legend.
Advises on avoiding vegetation, respecting installation height, and stable mounting surfaces.
Warns about waste attracting animals, birds perching, fence holes, and eaves water flow.
Specifies optimal height, provides drilling templates, and lists required accessories.
Details the terminal connections for power, alarms, bus, and tamper contacts.
Specifies maximum cable lengths based on wire type and section for power supply.
Explains the use of code selectors to adjust maximum detection distance and sensitivity.
Describes how the anti-masking alarm is triggered when the sensor is obstructed.
Details the procedure to check stored detection and sensitivity settings via READ mode.
Covers system parameters, date, time, and board name configuration through the app.
Explains how to adjust LEDs, buzzer, relays, antimask, MW/PIR settings, and detection parameters.
Guides on viewing real-time status and accessing device event logs.
Details changing the network address for compatibility with systems like MAXIBUS UNIVERSAL.
Illustrates the physical wiring connections between the PIRAMID and MAXIBUS CONNECT hub.
Covers customizing product name, reading network address, and configuring settings via the hub interface.
Describes how to access and interpret event log history displayed on the hub interface.
Step-by-step guides on activating and deactivating the wireless communication capabilities.
Instructions for configuring the device using the NT400 COORDINATEUR CONNECT.
Advises on confirming PIR filter status and cleaning it with a soft, moist cloth.
Lists common issues like permanent alarms, no triggering, and network errors with their remedies.
Briefly mentions default settings for LEDs and buzzer status.
Lists key technical data including range, detection mode, voltage, temperature, and protection index.
Provides diagrams and measurements for the external dimensions of the PIRAMID unit.
Lists product models, ranges, colors, and their corresponding reference numbers.
General| Type | Motion detector |
|---|---|
| Mounting | Wall, Ceiling |
| Detection Range | 12 m |
| Detection Angle | 360 degrees |
| Technology | PIR (Passive Infrared) |
