© 2003-2018 SOTA Instruments Inc. Page 4 of 7| www.sota.com
The Magnetic Pulser Model MP5 Manual
individual reactions that cannot reasonably be foreseen. Therefore, your use of
the SOTA Products constitutes your agreement that you are responsible for your
decision to use the technology.
SUMMARY OF LIGHTS
GREEN: Indicates the unit is ON and the pulse is building.
RED: Indicates the pulse is being released.
YELLOW: Indicates the Sound Option is ON.
HOW TO USE THE MAGNETIC PULSER
1. Insert the power plug from the AC-DC Wall Adaptor into
the unit and plug the adaptor into an electrical outlet.
2. Push the ON/OFF button. All the lights will ash in
sequence to indicate the unit is ready for use.
The GREEN lights indicate the pulse is building. The
RED light will ash each time the Pulsed Magnetic
Field is released from the Hand Paddle. A click may or
may not be heard as the pulse is released.
3. Sound Option: To hear a beep each time the magnetic
pulse is released, push the SOUND button. The YELLOW light will indicate the
Sound Option is ON.
4. The head of the Hand Paddle should be located on or as close to the body as possible.
It does not need to touch the body. Clothing will not interfere with the magnetic
eld.
Note: The Pulsed Magnetic Field penetrates up to nine inches.
5. For most applications, use the side of the
Hand Paddle marked Bio-North (-) against the
body.
6. When a cycle nishes (approx. 20 - 30
minutes) the unit will beep. To continue with
another cycle, push the ON/OFF button within
20 seconds of the beep. The unit turns itself OFF
if the ON/OFF button is not pushed within this
time.
To Next Page
Loading...
