Product Outlines
① A power indicator LED lamp.
② The operation indicator LED lamps indicate the operation status of the LAN port 1 to LAN port 10 from left to right.
ⓐ Link & Active LED (Green) : Light according to the connection status and operation status of the LAN ports.
ⓑ 100M/1G connections (Red orange/ Amber yellow) : Light in Red orange when connecting 100M, in Amber yellow when connecting 1G.
③ A 3 steps power on/off switch. Depending on each position of the switch, it works as follows
Upper position : Power on and light the LED lamps.
Middle position : Power off.
Lower position : Power on.
④ A DC power input connector.
⑤ The LAN port 1 to LAN port 8 from left to right.
⑥ The SFP port 9 and SFP port 10 are SFP port that is able to connect with optical cables. The connections can be made with SFP modules
and optical cables.
Precautions
When connecting cables, power off the devices which will be connected to the sNH-10G.
The sNH-10G does not have the network management function like IP allocation, fixed IP, or etc, so it should be used with a router or a device
which has the network management functions like the example below.
An example of connections
Supply :
(sMS-1000SQ, sMS-200ultra…)
NAS
To Previous Page
Loading...