SOtM sNH-10G User Manual

sNH-10G Operating instructions Rev1.1
Precaution
Please read this instruction carefully before use.

Do not attempt to disassemble or modify the product.

Keep the product away from the external shocks or vibrations
.

Do not use the damaged or peeled cables.

Do not use the product outdoors.

Product specifications and features are subject to change without notice
.
Warranty Information

Free warranty service

In case of the defect is found caused by the design or the production flaw while using the device properly, a manufacturer is
responsible for the faulty product and the free warranty service for 1 year from the date of purchasing.

Even in the warranty service period, malfunction or damage of products caused by the inevitable incident such as a natural
disaster is not subject of the free warranty service.

Warranty service at a cost

The product that free warranty service period is expired.

Malfunction of the product caused by a user’s fault.

Malfunction of the product caused by incidents.

Malfunction of the product caused by a natural disaster such as earthquake, flood, lightning & etc.

In case of the warranty service at a cost, a customer should cover the transportation costs.

Examples about an user’s fault

In case of attempts to disassemble or modify the device.

In case of not following the instructions on this manual.

Please read this operating instructions and Q&A board on our website carefully before asking for the warranty service.
Supplied components
 A sNH-10G unit
 An operating instruction
Specification
 User interface
Power indicator LED x 1
Link indicator Front LED x 10, Rear LED x 8
Active indicator Front dual Color LED x10, Rear LED x 8
Power switch : Power off, Power on with LED or without LED
 Network
Supported Standards
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3u 100Base-FX 100Mbps over fiber optic
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3z 1000Base-T 1 Gbps over fiber optic
IEEE 802.3x flow control and backpressure
Full-duplex and half-duplex operation
Supports 9216 byte jumbo packet length
Connector
RJ-45 ports x 8
SFP ports x 2
Optional audio grade clock
sCLK-EX with 10MHz Master clock input
 DC power input
Input voltage : 9Vdc
Optional 12Vdc when installing sCLK-EX
Optional 6.5Vdc ~ 8.5Vdc when installing sCLK-EX
Voltage tolerance: ±10%
Input current : 2A max
5.5mm OD, 2.1mm ID adaptor jack
 Operating environment
Operating temperature : +10 ~ +30℃
Storage temperature : 0 ~ +40℃
Operating & storage humidity : 10% ~ 90%
 Dimension
296 x 211 x 50(mm)
 Weight
2 Kg >
Ultimate High Performance Audio
www.sotm-audio.com

SOtM sNH-10G Specifications

General

Brand	SOtM
Model	sNH-10G
Category	Switch
Language	English

Summary

Operating Precautions

General Safety Guidelines

Read instructions carefully, avoid disassembly, shocks, vibrations, damaged cables, and outdoor use.

Warranty Information

Free Warranty Service

Covers defects from design or production flaws for 1 year from purchase.

Warranty Service at Cost

Applies to expired periods, user faults, or incidents like natural disasters.

Examples of User Fault

Includes attempts to disassemble, modify, or not following manual instructions.

Supplied Components

Included Items

Package contains one SNH-10G unit and one operating instruction manual.

Product Specifications

User Interface

Details on power, link, and active indicator LEDs, plus power switch functionality.

Network Standards

Supported Ethernet standards including 10Base-T, 100Base-TX, 100Base-FX, 1000Base-T, 1000Base-T Fiber.

Connectors

Features RJ-45 ports (x8), SFP ports (x2), and optional audio grade clock input.

DC Power Input

Specifies input voltage range (9Vdc, optional 12Vdc/6.5-8.5Vdc), tolerance, current, and connector type.

Operating Environment

Defines operating and storage temperature and humidity ranges.

Physical Dimensions and Weight

Provides product dimensions (296 x 211 x 50mm) and weight (2 Kg >).

Product Outlines and Features

Component Identification

Identifies power indicator LED, operation indicator LEDs, and their functions for LAN ports.

Port Descriptions

Details LAN ports (1-8), SFP ports (9-10) for optical connections, and power input connector.

Power Switch Operation

Explains the three-step power switch positions for powering on/off and LED control.

Additional Precautions and Connections

Connection Precautions

Advise powering off devices before connecting and using with a router for network management.

Example Connection Diagram

Illustrates a typical setup connecting power supply, router, SNH-10G, NAS, and network player.