Sound Choice Pro Audio CP8 User Manual

User Manual
CP8
Rev1.0
Connection type: RS-485
The CP8 communication to the DPA880T is by RS485. +1 and -2 are only required pins from the
RJ45
Power Supply
Power supply DC +12V is required to power the CP8 (not supplied with the panel)
To programme CP8:
CP8 you can set user defined as either Master Mode or Zone ModeUser. The following instruction
explains the process
− "Set" button is used to access the various menus and to confirm
− "Esc" button is used to exit from the menus
− "Encoder" The large rotary encoder is used to enter and exit the standby mode if the key is
pressed for around 5-6 sec. Or with the single press allows setting the steps for changing
the values of Gain and Volume (Gain =-127dB to + 12dB; Volume =-127dB to + 18dB)
− The Encoder is also used to move between the various menus and changing the values of
the parameters.
− LCD display 2 x 20 alphanumeric
− Power ON Led: when lit indicates that the system is powered
− Eth Led: when lit indicates that the CP8 is communicating with the DPA880T

Sound Choice Pro Audio CP8 Specifications

General

Brand	Sound Choice Pro Audio
Model	CP8
Category	Control Panel
Language	English

Summary

CP8 Control Panel Overview

CP8 Connection and Power

Details on RS-485 connection type and required DC +12V power supply for the CP8 unit.

CP8 Programming and Controls

Explains programming the CP8, button functions (Set, Esc, Encoder), and display/LED indicators.

System Setup Mode Configuration

Operating Modes and Defaults

Outlines the CP8's three operating modes and its factory default settings.

Accessing and Exiting System Setup

Instructions on how to enter and exit the SYSTEM SETUP mode and control standby.

Configure Mode, ID, and Stand-by

Guide to configuring the CP8's mode (Master/Zone), device ID, and auto stand-by settings.

Configure Zone Setting

Instructions for setting the Zone (output) parameter, visible when MODE is set to Zone.

Master Mode Operations

Input Selection and Control

Managing input gain, mute status, and selecting specific inputs (1-8) in Master Mode.

Output Selection and Control

Configuring output volume, mute status, and selecting specific outputs (1-8) in Master Mode.

Program Loading and Info

Loading presets and viewing CP8 model, version, and ID information.

Locking the CP8

Procedure to lock the CP8 control panel, preventing unauthorized changes.

Zone Mode Operations

Zone Routing and Input Association

Associating inputs with zones, configuring input mute, and gain within a zone.

Zone Volume and Mute Control

Adjusting volume and mute settings for individual zones.

Zone Info and Lock

Displaying zone-specific information and applying lock settings for zones.

CP8 Connection Details

RS485 and Power Connectivity

Visual guide to RS485 terminals and power input connections on the CP8 unit.

RJ45 Connector Pinout

Diagram illustrating the pin configuration of the RJ45 connector for RS485 communication.