SoundAura SAHB48 User Manual

Power
Press and hold to power
ON or OFF
Wireless Headphones
User’s Guide for Model SAHB48 v1978-01
LED
MIC
Volume +/-
Press to adjust volume.
Play / Pause / Speakerphone
Press to play or pause audio.
Press to answer incoming phone call.
Pair Bluetooth
Press and hold for 9 seconds to
pair Bluetooth.
Features
• Bluetooth Wireless: range - 33 ft.
• Built-in microphone
• Aux in (3.5mm audio input)
• Folding adjustable headband
• On-ear controls
• Voice prompts announce headphone operations
• Built-in rechargeable lithium ion battery: life - approx. 8 hrs
• Micro-USB port for battery recharge
Includes
• 3.5mm audio cable
• Micro-USB to USB charging cable
DC Power Input
Microphone
Indicator LED
Aux In
Battery Charging
Initial charge time is approximately 2 hours. Charge fully before
use. The low battery indicator will ash for 1 minute, then the
unit will automatically power OFF.
1. Using a Micro-USB to USB cable (included), connect to
the USB port of a powered on computer or USB power
adaptor (not included) to charge the unit.
LED
MIC
STATUS INDICATOR
Power On Flashing blue light
Charging Solid red light
Charging Complete Light OFF
Pairing Flashing red / blue light
Pairing Complete Solid blue light
SAHB48-1978-01-IB.indd 1 21/7/2017 10:37:03

SoundAura SAHB48 Specifications

General

Brand	SoundAura
Model	SAHB48
Category	Wireless Headphones
Language	English

Summary

Battery Charging Guide

Initial Charge

Initial charge time is approximately 2 hours. Charge fully before use.

Charging Method

Connect to a powered-on computer or USB power adaptor via Micro-USB to USB cable.

Pairing Bluetooth and Audio Playback

Pairing Process

Steps to power on, initiate pairing mode, and connect to a Bluetooth device.

Audio Playback

Playback Controls

Speakerphone Functions

Accept/End Call

Press the / button to accept or end a call.

Redial Last Number

FCC Warning and Compliance

FCC Compliance Statement

States equipment complies with Part 15 of FCC Rules for Class B digital devices.

Interference Guidelines

Provides measures to correct harmful interference to radio communications.

Operation Conditions

Device must not cause harmful interference and must accept received interference.

RF Exposure

Evaluated to meet general RF exposure requirements for portable use.