12
EN
Hold a few
seconds
-
1 Click
2 Clicks
3 Clicks
4 Clicks
6 Clicks
Hold during
power on
Add / Delete Manually add / delete the current
transmitter to / from your Green List.
Auto Add SKAA will automatically add the
current Amber transmitter to your Green List if
you listen to it for 30 minutes.
Green Mode Rotate through your list of
favourite transmitters (Green List) — when a
favourite transmitter is found, the search stops
and audio plays from that transmitter.
Amber Mode Explore for new, unknown
transmitters (ones which are not already on
your Green List).
Mute do again to Unmute; any Click command
will first Unmute and then do its function.
Red Mode If you have 2 or more transmitters on
your Green List, power on just the one you want
to hear and it plays automatically
Factory Reset Clear Green List. Start over!
1. Place JOIN speakers to be added to the
cluster within 3 meters of the Master JOIN
speaker.
2. Power off HOST speaker.
3. Power on all JOIN speakers to be added to
the cluster, but keep the Master JOIN speaker
powered off.
4. On the Master JOIN speaker, hold down the
Bond button before pressing Power Button
- hold both down and wait until red flashing
starts - first release the power button, then
the Bond button. The Master JOIN speaker
now blinks red. All other LEDs on the Master
JOIN speaker go dark.
Added
Added
Hunting
Hunting
Muted
Hunting
Reset done
Receiver
has entered
Cluster Up
mode.
The Cluster
has been
successfully
made
Bonded
Next one
Bonded
Bonded
Deleted
Command
•• to ••
•• to ••
•• dim
•• dim
• • , • • or • •
slow flash
•• dim
•• flash
•• flash
•• bright
•• bright
•• flash
•• bright
• • bright
•• flash
IndicatorBond Button Meaning
To Next Page
Loading...
