Adjust the speech level with the [speech up] and [speech down] keys.
Enter the [MPT Options] menu using the [Menu] key.
Run the MPT using the [Select] key.
Change the selected list using the [up] and [down] keys.
When you have selected the required list and set the speech and noise
levels, Press [Select] to play the list.
The following information is being displayed.
Name of test = MPT in WB noise
Noise Level = 40 dB
Speech level = 60 dB
Selected voice = Male
Current word = Dog (from list 2)
Progress = test word 1 from a possible 6
The Parrot will now play all 6 of the selected list at the levels set.
Pressing the [Select] key during playback will pause the test until you
press the [Select] key again.
During this pause, you can scan through the sequence of test items using
the [up] and [down] keys. This is useful if you need to repeat the last
item or items. You can also skip through some of the items if required.
Pressing the [Menu] key either during playback or when paused will return
to the Setup test screen.
To Next Page
Loading...