MPT Options Menu
Use the [up] and [down] keys to change the highlighted option.
Use the [Select] key to select the highlighted option.
Use the [Menu] key to return to the Setup test screen (see page 10).
Cal Check
This option will play a calibration test noise at 60 dB(a) measured at 75
cms from the main speaker. For the Parrotplus2 , if a test in noise is
selected, you will be required to press any key after the first burst of
noise. This will give you the opportunity to re-align your sound level
meter. The unit will then play a burst of noise through speaker 2. This
will again be at 60 dB(a) measured at 75 cms ( or 100cms if selected)
from the speaker.
Voice
This brings up a sub-menu enabling you to select male or female voice.
Use the [up] and [down] keys to change the highlighted option.
Use the [Select] key to select the highlighted option and return to the
previous menu.
To Next Page
Loading...