Need help?Do you have a question about the Soundchoice PROAudio C4 Series and is the answer not in the manual?
General| Signal-to-Noise Ratio | >100dB |
|---|---|
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Input Impedance | 20k Ohms |
| Protection | DC |
| Dimensions | 483mm x 89mm x 305mm |
| Weight | 12kg |
Indicates amplifier protection status due to faults like short circuit, overload, or high temperature.
Signals when input or output signal levels are too high, potentially causing distortion.
Confirms the presence of an input signal for each channel.
Confirms the presence of an output signal for each channel.
Indicates that the unit is powered on by AC or DC input.
The main switch used to turn the amplifier on and off.
Connects the unit to the power source, supporting auto-switching from 110V to 230V.
Terminals for connecting 100V line loudspeakers using phoenix connectors.
Terminals for connecting low impedance 8Ω loudspeakers using phoenix connectors.
Adjusts the input sensitivity for optimal signal response.
Allows enabling or disabling the high-pass filter function per channel via dipswitches.
Enables or disables the auto-standby feature via dipswitches.
Guidelines for troubleshooting and addressing product issues, including variations and options.
Details on the global three-year warranty terms and conditions.
To Next Page
