Need help?Do you have a question about the SoundCraft SPIRIT FOLIO SX and is the answer not in the manual?
General| Brand | SoundCraft |
|---|---|
| Model | SPIRIT FOLIO SX |
| Category | Mixer |
| Language | English |
Guidance on proper placement and cabling for the mixer.
Essential safety guidelines and warranty information.
Explains the XLR microphone input and its wiring.
Details the connection and use of line-level inputs.
Describes the insert point for external signal processors.
Details on unbalanced RCA stereo inputs.
Details on balanced/unbalanced 3-pole jack stereo inputs.
Explains the use of insert points for mix outputs.
Describes balanced/unbalanced connections for Mix and Sub outputs.
Information on auxiliary output connections.
Explains the direct output connections for each channel.
Details on the headphone output and compatible impedance.
Explains signal polarity and its importance in audio.
Guidelines for proper grounding and shielding to minimize noise.
Explains the direct output function for recording or effects.
Details on the XLR microphone input, phantom power, and gain.
Information on connecting and using line-level sources.
Explains the insert point as a direct send option.
Explains the sensitivity control for setting input levels.
Details the high-pass filter for reducing low frequencies.
Explains the HF, Mid, and LF EQ controls for tone adjustment.
Details the use of auxiliary sends for foldback and effects.
Describes the function and application of Aux Send 1.
Describes Aux Send 2, its post/pre-fade switching.
Describes Aux Send 3, its post-fade function.
Explains the pan control for stereo image placement.
Details the channel mute/on switch.
Explains routing to Mix or Sub buses.
Describes the channel fader for level adjustment.
Explains the pre/post-fade setting for direct outputs.
Details the PFL function for pre-fade listening.
Details on unbalanced RCA stereo inputs.
Explains the level control for stereo channels.
Explains routing to Mix or Sub buses for stereo channels.
Details on balanced/unbalanced 3-pole jack stereo inputs.
Explains the gain control for stereo channels.
Details the HF and LF EQ controls for stereo channels.
Details the use of auxiliary sends for stereo channels.
Describes Aux Send 1 for stereo channels.
Describes Aux Send 2 for stereo channels.
Describes Aux Send 3 for stereo channels.
Explains the balance control for stereo image placement.
Details the channel mute/on switch for stereo channels.
Explains routing to Mix or Sub buses for stereo channels.
Describes the channel fader for level adjustment on stereo channels.
Details the PFL function for stereo channel monitoring.
Information on enabling phantom power for condenser microphones.
Indicates when the console is powered on.
Explanation of the bargraph meters for signal level monitoring.
Control for setting the 2 Track input level.
Selects the monitor source between Mix and Sub.
Selects the 2TK input as the monitor source.
Controls the output level for monitors and headphones.
Master level controls for each auxiliary send.
Functionality for monitoring auxiliary outputs.
Switching Aux 2 sends between post-fade and pre-fade.
Combines stereo Mix L/R signals into a mono output.
Controls for setting the final level of Mix and Sub outputs.
Option to route Sub outputs to the main Mix outputs.
Tips on optimal microphone placement for sound quality.
Step-by-step guide for initial control and level settings.
Explains configuring direct outputs for pre/post-fade recording.
Explains calculating delay settings for fill speakers.
Guidelines for storage, cleaning, and avoiding damage.
Noise levels for different signal paths and configurations.
Measures signal isolation between channels and functions.
Frequency response characteristics of the mixer.
Total Harmonic Distortion levels.
Impedance values for various inputs and outputs.
Maximum signal levels for inputs and outputs.
Information regarding the optional rack-mounting kit.
Step-by-step instructions for rack mounting the mixer.
Wiring diagrams for balanced connections.
Wiring diagrams for unbalanced connections.
Wiring diagrams for insert leads.
Wiring for balanced Y-type leads.
Wiring for a headphone splitter.
Wiring for a headphone separator.
Wiring for unbalanced Y-type leads.
To Next Page
