To Next PageTo Next Page
Need help?Do you have a question about the SoundCraft GIGRAC and is the answer not in the manual?
General| Brand | SoundCraft |
|---|---|
| Model | GIGRAC |
| Category | Mixer |
| Language | English |
Overview of the GigRac's key features and capabilities.
Specifications for the amplifier power output for GigRac 300 and 600.
Guide to connecting loudspeakers to the GigRac unit.
Instructions for connecting a vocal microphone.
How to adjust the tone of signals using Treble and Bass controls.
Connecting guitars or stereo keyboards to the GigRac.
Using the built-in GigFX digital effects processor.
Details the combination Jack/3 Pin XLR input connector and accepted cable types.
Explains the 20dB PAD switch for channels 1-4 to prevent distortion.
Describes the channel's Main Volume control for the main mix output.
Details the channel's Monitor Volume control for monitor/headphone mixes.
Explains the FX control for sending signals to the effects processor.
Describes the Bass control for adjusting low frequencies by +/- 15dB.
Describes the Treble control for adjusting high frequencies by +/- 15dB.
Controls the overall output level to amplification and main output.
Controls the overall output level to monitor and headphone sockets.
Activates 48V phantom power for condenser mics on channels 1-4.
Adjusts signal output across 7 frequency bands by +/- 10dB.
Selects signal path for the Graphic Equaliser (GigRac 600 only).
Indicates when the GigRac is powered on.
Determines signals sent to Amp 1/Speaker Output 1 and Amp 2/Speaker Output 2 (GigRac 600 only).
Indicates when the amplifier input level is too high.
10-segment meter showing signal level output from the Main Master Volume.
Post-fade signal output for connecting recording devices.
Output for connecting headphones, controlled by Monitor Master Volume.
Carries the Main Mix signal to external amplifiers or powered speakers.
Carries the Monitor Mix signal for stage foldback systems.
Carries the FX Mix signal for external effects processing.
Allows blending of external mixer output or effects return.
Socket for connecting an optional footswitch to control FX.
Toggles the effect on/off, with an indicator LED.
Activates 48V phantom power for condenser mics on channels 1-4.
Adjusts signal output across 7 frequency bands by +/- 10dB.
Selects signal path to internal amplification and speaker outputs.
Indicates when the GigRac is powered on.
Indicates when the amplifier input level is too high.
10-segment meter showing signal level output from the Main Master Volume.
Post-fade signal output for connecting recording devices.
Output for connecting headphones, controlled by Monitor Master Volume.
Carries the Main Mix signal to external amplifiers or powered speakers.
Carries the Monitor Mix signal for stage foldback systems.
Carries the FX Mix signal for external effects processing.
Allows blending of external mixer output or effects return.
Socket for connecting an optional footswitch to control FX.
Toggles the effect on/off, with an indicator LED.
Turns the GigRac 600 On or Off.
Connects the supplied power cable.
Details Speakon and 1/4" Jack outputs for loudspeakers.
Turns the GigRac 300 On or Off.
Connects the supplied power cable.
Details Speakon and 1/4" Jack outputs for loudspeakers.
