Snooze
Snooze
Snooze
Snooze function:
function:
function:
function:
At the preset alarm time, when the alarm is ringing, press the SNOOZE button to interrupt the
alarm temporarily and sleep another 9 minutes. Snooze function will continue each time you
press on the snooze button.
To
stop Snooze function, press the STANDBY button. Without pressing snooze button, after 60
minutes, the alarm will stop automatically.
Note: The clock time settings will be lost when the system is switched off when the main plug is
removed
7
7
7
7 .
.
.
. USING
USING
USING
USING THE
THE
THE
THE FM
FM
FM
FM RADIO
RADIO
RADIO
RADIO
Press "INPUT" Button to select FM. Frequency 87.5 to 108 MHz.
Station search function ( Pull out the antenna, the signal will be better received )
A ． Whilst listening to a station press the buttons or to tune up or down the current
frequency in 0. 0 5MHz steps , long press the above buttons can search the previous or next
stations , the display will show the corresponding information, it won ’ t stop until there
’
s the
station .
.
.
.
B ． The channel of the tuner will switch automatically when the station is stereo and the signal is
strong enough, it will play with stereo, the display will show ((ST)) ; otherwise it will play with
Mono, and the display will show nothing.
Store and recall a preset station
This unit has 2 0 presets for FM radio to facilitate the play of the station.
1 ） P reset stations
When playing the current station ， press MEM button, the number of the station flashing on
the display. Press PRESET - or PRESET + button can change the position of the current
station ， when the number stops flashing or press MEM button, the station will sto re in the
current position, there
’
s the corresponding display on the LCD.
2 ） Scan function
In the current position , long press MEM button , can scan the station forward , It will stored
when there ’ s the radio signal ， can s ave up to 20 stations , It will play from the first station
when the preset full, there ’ s the corresponding display on the LCD .
3) Play the preset station
When power on, press INPUT and to choose FM ， press MEM button to scan the preset
stations, after it, you can press the number keys to search the station, or press PRESET -
or PRESET + button search the preset station and play.
(NOTE ： Power off, the preset stations will no longer be memorized )
Use of the number keys
Select each of the tracks you wish to play using the numeric buttons. If you require to
programmed a track above 10, use the 10+ button. Each press of this button will increase the
selection by ten. For example:
To
programmed track 12, press the 10+ button once and then press the 2 button.
To
programmed track 2 0 , press the 10+ button twice and then press the 0/10 button.
5
FM 93.50
((ST))
MHz
To Next Page
Loading...
