SCD8100 / English Instruction Manual
6
Repeat function
During playback, press the repeatedly the “P.MODE” button to select the following repeat
functions:
Audio CD:
1x = the normal play mode.
2x = the current track is repeated continuously. The display will show “REP-1”.
3x = the whole CD is played continuously. The display will show “REP-ALL”.
4x = all tracks will be played in random order. The display will show “RANDOM”.
5x = back to the normal play mode.
MP3-CD:
1x = the normal play mode.
2x = the current track is repeated continuously. The display will show “REP-1”.
3x = the selected folder is repeated continuously. The display will show “REP-DIR”.
4x = the whole CD is played continuously. The display will show “REP-ALL”.
5x = all tracks will be played in random order. The display will show “RANDOM”.
6x = back to the normal play mode.
Programmed Play
This can be used to program any desired sequence of tracks. For audio CD, you can program
up to 20 tracks. For MP3-CD, USB or card mode, you can program up to 99 tracks.
1. Press the “INFO / ” button.
2. Press the "PROG" button.
With audio CD, “P01 T--001” flash in the display (P01 means the program number and T--
001 the selected track).
With MP3-CD, USB or SD card mode, “P01 F--01 001” flash in the display (P01 means the
program number, F--01 the selected folder and 001 the selected track).
3. Use the “ ” or “ ” buttons to select the desired track and press the "PROG" button
again. The display “P01” change to “P02”.
4. Select the next track with the “ ” or “ ” buttons and press the "PROG" button again.
Repeat the procedure until all the desired tracks are selected.
Note:
Once the storage capacity of the tracks to be programmed has been reached, “FULL” will
show in the display.
5. Press the “ENTER / ” button to start the programmed playback. The upper-left of the
display will show “MEM”.
6. Press once the “INFO / ” button to stop the playback while retaining the program.
7. To play the programmed back again, press the “ENTER / ” button.
8. To delete the program, press the “INFO / ” button twice. The notification “MEM” will
disappear.
To Next Page
