SOUNDMASTER SCD8100 - Page 20

SCD8100 / English Instruction Manual
8
main unit will switch to standby mode as no or less audio signal input. This is not a malfunction!
EQUALIZER
In on mode, press repeatedly the “EQ” button to select a sound effect:
FLAT, ROCK, POP, JAZZ, CLASSIC
SLEEP TIMER
This unit can switch to standby automatically after a defined period.
Set the sleep timer
1. When the unit is turned on, press the “MENU” button, select the point “SYSTEM” with the
“ ” or “ ” button and press “ENTER / ” to confirm.
2. Select the point “SLEEP” and press “ENTER / ”.
3. Select with the “ ” or “ ” button the desired sleep timer period (Off, 15, 30, 45, 60, 90)
and press “ENTER / ” to confirm.
Note: When the sleep timer is activated, the upper-right side of the display shows the sleep time
counter.
Deactivate the sleep timer
1. Repeat the steps 1 and 2 to enter the sleep timer menu.
2. Select with the “ ” or “ ” button the setting “Off” and press “ENTER / ” to confirm.
When the sleep timer is deactivated, the sleep time counter disappears.
ALARM
You can setup Alarm 1 and Alarm 2.
1. When the unit is turned on, press the “MENU” button, select the point “SYSTEM” with the
“ ” or “ ” button and press “ENTER / ” to confirm.
2. Select the point “Alarm” and “ENTER / ” to confirm.
3. Select “Alarm 1 Setup” or “Alarm 2 Setup” and press “ENTER / ” to confirm.
4. Set the alarm time and press the “ENTER / ” button again.
5. Set the duration time (15, 30, 45, 60, 90 minutes) with “ ” or “ ” and confirm with the
“ENTER / ” button.
6. Select the wake up source (DAB, FM, CD, USB, CARD or buzzer) and press again the
“ENTER / ” button.
7. Select the wake up frequency (Daily, Once, Weekends, Weekdays) and confirm the
selection with “ENTER / ”.
NOTE: If you have select “Once”, set the date for wake up and press “ENTER / ”.
8. Now adjust the volume level with the “ ” or “ ” button and press “ENTER / ”.
9. If you want to activate the alarm, set “Alarm on”. If you want to deactivate the alarm, set
“Alarm off”. When the alarm is activated, the alarm icon is shown in the display.
Deactivate sounding alarm tone
When the alarm sounds, press the “ / SOURCE” button to deactivate the sounding alarm tone.
Snooze