UR8400 / English Instruction Manual
NAP TIMER FUNCTION (countdown function with alarm)
When switched off, you can activate the NAP Timer function. Press the >>
button (5) "N90" appears in the display. Set the desired time (minutes)
within 5 seconds with the >> button (5) (after 90-80-70-60-50-40-30-20-10
minutes). A beep automatically turns on after the set time. Press the ON / OFF
button (7) to deactivate the function / beep.
* The NAP TIMER FUNCTION only switches on a beep; Radio as alarm mode
is not possible in this function.
DST - summer / winter time
With this function you can regulate the summer and winter time with a push of
a button. Press and hold the >> button (5) for 2 seconds until the hour changes
in the LED display.
RESET
When changing the battery (power reserve) or a malfunction, please remove
the mains plug from your socket and plug it in again after approx. 3 minutes.
TECHNICAL SPECIFICATIONS
FM range: FM 87,5 – 108 MHz
Backup Battery: 3V CR2032 Battery (not included)
Power supply: AC 230V~50Hz
IMPORTER
Wörlein GmbH Tel.: +49 9103 71 67 - 0
Gewerbestrasse 12 Fax.:+49 9103 71 67 - 12
D 90556 Cadolzburg Email. info@woerlein.com
GERMANY
Technical changes and misprints reserved
Copyright by Wörlein GmbH, 90556 Cadolzburg
Duplication only with the express permission of Wörlein GmbH
To Next Page
Loading...
