Need help?Do you have a question about the SoundPeak SP-1500.2 dbPRO and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| RMS Power @ 4 Ohms | 500W x 2 |
| RMS Power @ 2 Ohms | 750W x 2 |
| Bridged RMS Power @ 4 Ohms | 1500W x 1 |
| THD | <0.1% |
| Input Sensitivity | 0.2V - 6V |
| Low Pass Filter | 50Hz - 250Hz |
| Fuse Rating | 120A |
| Operating Voltage | 10V - 16V |
Lists the key features of the SP-1500.2 dbPRO amplifier, including power supply and crossover options.
Lists the key features of the SP-2000.2 dbPRO amplifier, highlighting its Class A/B design and MOSFET PWM power supply.
Details the features of the SP-2300.2 dbPRO amplifier, such as bridgeable channels and protection circuitry.
Diagram illustrating the speaker connection for a single bridged channel with 2~8 ohms impedance.
Diagram for connecting speakers in stereo mode, suitable for 1~8 ohms impedance per channel.
Diagram for tri-mode connection, supporting 4~8 ohms impedance for the third channel.
Troubleshooting steps for when the amplifier fails to power on, checking voltage and ground.
Guidance on resolving issues when the protection LED is illuminated, checking for short circuits.
Steps to diagnose and resolve recurring fuse blowing issues related to impedance or shorts.
Troubleshooting advice for overheating, checking speaker impedance and airflow.
Steps to address distorted or low sound output, checking input levels and crossovers.
Solutions for high hiss or engine noise, focusing on ground connections and RCA inputs.
Detailed technical specifications for the SP-1500.2 dbPRO, including power output and frequency response.
Technical details for the SP-2000.2 dbPRO, covering RMS power, signal-to-noise ratio, and dimensions.
Technical data for the SP-2300.2 dbPRO, including rated power output and fuse rating.
To Next Page